Brocade Communications Systems RFS6000 - Manual (Page 382)

380 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Crypto Map config commands
10
set
Crypto Map config commands
Configures set parameters for the peer device
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
set [localid|mode|peer|pfs|remote-type {ipsec-l2tp|xauth}|
security-association|session-key|transform-set)
set localid [dn|hostname]<name>
set pfs [1|2|5]
set mode [aggressive|main]
set security-association [level|lifetime]
set security-association level perhost
set security-association lifetime [kilobytes|seconds]<value>
set session-key [inbound|outbound]{ah|esp}
set session-key [inbound|outbound] ah <hexkey data>
set session-key [inbound|outbound] esp <SPI>cipher<hexdata key> authenticator
<hexkey data>
set peer [ipaddress|<host name>]
set remote-type [ipsec-l2tp|xauth]
set transform-set <name>