Brocade Communications Systems RFS6000 - Manual (Page 641)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 639
53-1001931-01
Wireless configuration commands
20
nas-id
Wireless configuration commands
Configures the NAS ID to be sent to the RADIUS server
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
nas-id <nas-id>
To override nas-id on a per WLAN basis:
wlan <1-4098> nas-id <nas-id>
Parameters
Example
RFController(config-wireless)#nas-id WIRELESSWELL
RFController(config-wireless)#
RFController(config-wireless)#wlan 1 nas-id WIRELESSWELL1
<nas-id> A character string to be used as the NAS ID. Can be up to 256
characters long.