Brocade Communications Systems RFS6000 - Manual (Page 254)

252 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
ip
Global Configuration commands
Configures a selected Internet Protocol (IP) component
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
NOTE
Using
access-list extended
moves you to the
(config-ext-nacl)
instance. For more
information, see Chapter 14, Extended ACL Instance .
Using
access-list standard
moves you to the
(config-std-nacl)
instance. For more
information, see Chapter 15, Standard ACL Instance .
Using
ip dhcp pool <pool-name>
command to move to the
(config-dhcp)
instance. For
additional information, see Chapter 17, DHCP Server Instance .
Using
ip dhcp class <class-name>
moves you to the
(config-dhcpclass)
instance. For
additional information, see Chapter 18, DHCP Class Instance .
Syntax
ip [access-list|default-gateway|dhcp|domain-lookup|
domain-name|dos|http|http-https|igmp|local|name-server|nat|route|
routing|ssh|telnet]
ip [domain-lookup|routing]
ip access-list [standard|extended]
ip access-list extended [<100-199|<2000-2699>|<acl-name>]
ip access-list standard [<1-99>|<1300-1999>|<acl-name>]
ip default-gateway <IP>
ip dhcp [bootp|class|excluded-address|option|ping|pool]
ip dhcp bootp ignore
ip dhcp class <class-name>
ip dhcp excluded-address <IP-range-low> {<IP-range-high>}
ip dhcp option <option-name> <option-code> [ascii|ip]
ip dhcp ping timeout <1-10>
ip dhcp pool <pool-name>
ip domain-name <domain-name>
ip dos [ascend|bcast-mcast-icmp|chargen|enable|fraggle|
ftp-bounce|invalid-protocol|option-route|router-solicit|router-advt|
smurf|snork|tcp-intercept|tcp-max-incomplete|twinge]
log [<0-8>|alerts|critical|debugging|emergencies|error|
informational|none|notifications|warnings]
ip http [secure-server|secure-trustpoint|server]
ip http [secure-server|server]
ip http secure-trustpoint <trustpoint-name>