Brocade Communications Systems RFS6000 - Manual (Page 95)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 93
53-1001931-01
show
2
redundancy members
Common to all modes
Displays the member controllers in the cluster. The user can provide the
IP address
of the
controller in cluster whose information alone is needed.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show redundancy members [<IP>|brief]
Parameters
Example
RFController(config)#show redundancy members brief
Member ID (Self) : 10.10.10.10
Member State : Not Applicable
Member ID : 10.10.10.1
Member State : Peer Configured
redundancy members
[<IP>|brief] Displays member controllers in the cluster
•
<IP>– Displays the IP addresses of member controllers
•
brief – Displays members in brief