Brocade Communications Systems RFS6000 - Manual (Page 635)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 633
53-1001931-01
Wireless configuration commands
20
Parameters
Example
RFController(config-wireless)#mac-auth-local 1 allow 01:02:03:04:05:06
01:02:03:04:05:07 not-mapped
RFController(config-wireless)#mac-auth-local 2 deny
01-20-30-40-50-60 01-20-30-40-50-70 not-mapped
RFController(config-wireless)#mac-auth-local 1 allow 01:02:03:04:05:06
01:02:03:04:05:07 not-mapped zone 1
<1-1000> Sets the mac-auth-local entry index to a value between 1 and
1000.
allow Allows wireless clients that match this rule to associate.
deny Denies association to wireless clients that match this rule.
rate-limit Sets the rate limit value for this ACL entry.
<starting-MAC> Starting MAC address in AA-BB-CC-DD-EE-FF or
AA:BB:CC:DD:EE:FF format.
<ending-MAC> Ending MAC address in AA-BB-CC-DD-EE-FF or AA:BB:CC:DD:EE:FF
format.
<list> Configures the local MAC authentication list.Sets the list (1,3,7) or
range (3-7) of WLAN indices.
not-mapped An unmapped row in the ACL.
<radio-desc> Optional radio description substring.
zone
[<1-48>|default|
unknown] Optional GeoFencing location information for devices matching
this ACL information.
•
<1-48> – Administrator defined-id.
•
default – The user has been located within the site in the
default zone.
•
unknown – If the users location is currently unknown or out
of bounds of the site.
rate-limit
[wired-to-wireless|
wireless-to-wired]
<100-1000000> Set the rate limit for ACL
•
wired-to-wireless – Sets rate for down link direction from
network to. wireless client.
•
wireless-to-wired – Sets the rate for up link direction from
wireless client to network.
•
<100-1000000> – The rate in kbps.