Brocade Communications Systems RFS6000 - Manual (Page 670)

668 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
•
dot11i – modify dot11i service parameters.
•
dump-core – Creates a core file of the ccsrvr process.
•
enhanced-beacon-table [channel-set|enable|
erase-report|max-ap|scan-interval|scan-time] – Enhanced
beacon table for AP locationing.
•
channel-set [a|an|b|bg|bgn] <1-200> – Adds
channels to the different radio types. Channel types are
a, an, b, bg, bgn. The channel number must be in the
range 1 to 200.
•
enable – Enables the Enhance Beacon Table feature for
AP locationing.
•
erase-report – Erases the reports for Enhanced Beacon
Table feature.
•
max-ap <0-512> – Sets the maximum number of APs to
be recorded in the Enhanced Beacon Table. Set a value
in the range 0 -512.
•
scan-interval <10-60> – The time duration between two
enhanced beacon table for AP locationing scans in
seconds.
•
scan-time <100-1000> – The time duration of an
Enhanced Beacon Table scan in milliseconds.
•
enhanced-probe-table [enable|erase-report|max-client|
preferred|window-time] – Enhanced probe table for Client
locationing.
•
enable – Enables the Enhanced Probe Table feature for
Client locationing.
•
erase-report – Erases the reports for Enhanced Probe
Table feature.
•
max-client <0-512> – Sets the maximum clients in the
Enhance Probe Table report.
•
preferred <MAC> – Add the MAC <MAC> to the
preferred Client list.
•
window-time <10-60> – Sets the Window Time for
probe collection in seconds to a value in the range 10 to
60 seconds.