Brocade Communications Systems RFS6000 - Manual (Page 723)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 721
53-1001931-01
RTLS config commands
21
show
RTLS config commands
Displays current system information
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show <parameters>
show rtls [aeroscout|espi|filter|ekahau|reference-tags|
rfid|site|sole|tags|zone]
Parameters
Usage Guidelines
Use ? at the end of each option until the final configuration is displayed.
Example
RFController(config-rtls)#show ?
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the system
autoinstall autoinstall configuration
banner Display Message of the Day Login banner
boot Display boot configuration.
clock Display system clock
commands Show command lists
crypto encryption module
debugging Debugging information outputs
dhcp DHCP Server Configuration
environment show environmental information
file Display filesystem information
firewall Wireless firewall
ftp Display FTP Server configuration
history Display the session command history
interfaces Interface status
ip Internet Protocol (IP)
ldap LDAP server
licenses Show any installed licenses
logging Show logging configuration and buffer
mac Internet Protocol (IP)
mac-address-table Display MAC address table
mac-name Displays the configured MAC names
management Display L3 Managment Interface name
mobility Display Mobility parameters
ntp Network time protocol
password-encryption password encryption
? Suffix ? to the parameter to view its options and their related
configuration details.