Brocade Communications Systems RFS6000 - Manual (Page 531)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 529
53-1001931-01
DHCP Config commands
17
network
DHCP Config commands
Sets the network pool’s IP address
This address maps the current DHCP pool with a specific network.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
network [<IP>|<IP/Mask>]
Parameters
Usage Guidelines
Ensure a VLAN interface (with specific network/subnet) exists on the controller before mapping a
DHCP pool to a particular network.
Example
RFController(config-dhcp)#network 2.2.2.0/24
RFController(config-dhcp)#
network [<IP>|<IP/Mask>] Sets the network number and mask
•
<IP> – Network number in dotted decimal format
•
<IP/Mask> – Network number and mask