Brocade Communications Systems RFS6000 - Manual (Page 119)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 117
53-1001931-01
show
2
RFController(config)#show wireless ap config 2
ap mac address : 00-A0-F8-BF-89-45
ap adoption-policy: allow
ap name : AP-00-A0-F8-BF-89-45
ap location : AP-00-A0-F8-BF-89-45-Location
ap on-board-radios: 0
ap secure WISPe mode : disable
ap secure WISPe mode staging : disable
ap shared WISPe secret : 0 defaultS
ap country-code : ""
RFController(config)#
RFController>show wireless ap-detection-config
Rogue AP timeout : 300 seconds
Approved AP timeout : 300 seconds
client-assisted scan : enabled
client-assisted scan refresh : 300 seconds
configured approved-aps :
Index | Bss Mac | Ssid
-------------------------------------------------------
Adaptive minimum adoption version: 2.0.0.0-000R
RFController>
RFController>show wireless ap-images
Idx ap-type Image-Name Size (bytes) Version
1 ap300 AP300-WISP 325212 00.02-37
2 ap300 AP300-WISPe 319776 01.00-2281r
3 ap300 AP300-IDS-Sensor 350092 00.00-04
RFController>show wireless ap-unadopted
RFController>
RFController>show wireless approved-aps
access-point detection is disabled
RFController>
RFController>show wireless channel-power 11a indoor
Channel Max Power (dBm) Radar Detected
36 (5180 MHz) 17 -
40 (5200 MHz) 17 -
44 (5220 MHz) 17 -
48 (5240 MHz) 17 -
149 (5745 MHz) 20 -
153 (5765 MHz) 20 -
157 (5785 MHz) 20 -
161 (5805 MHz) 20 -
165 (5825 MHz) 20 -
RFController>
RFController(config)#show wireless ap
Number of access-points adopted : 3
Number of AAPs adopted : 0
Available AP licenses : 45
Available AAP licenses : 0
Redundancy enabled : N
Redundancy mode : active
# MAC RADIOS[indices] MODEL-NUMBER ADOPTION-MODE STATIC IP
1 00-A0-F8-BF-8A-70 2 [ 3 4 ] WSAP-5100-100-WW L2 (vlan:10)
2 00-A0-F8-BF-89-45 2 [ 5 6 ] WSAP-5100-100-WW L2 (vlan:10)
RFController(config)#