Brocade Communications Systems RFS6000 - Manual (Page 779)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 777
53-1001931-01
smart-rf config commands
25
no
smart-rf config commands
Disables the Smart RF configurations
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
no [assignable-power-range|auto-assign|extensive-scan|
hold-time|number-of-rescuers|radio|recover|
retry-threshold|scan-dwell-time|schedule-calibrate|
select-channels|service|smart-rf-module|verbose]
no assignable-power-range [ <4-20> <4-20>]
no auto-assign [all|channel|detector|power|rescuer]
no extensive-scan enable
no number-of-rescuers
no radio [ <1-4096>|MAC-ADDRESS|RADIO|all-11a|all-11b|
all-11bg]
no recover [coverage-hole|interference|neighbor] enable
no retry-threshold [ <0.0-15.0>]
no scan-dwell-time [ <1-10>]
no schedule-calibrate [enable|interval|start-time]
no select-channels <WORD>
no service smart-rf [max-history|replay enable|rescue]
no smart-rf-module enable
no verbose