Brocade Communications Systems RFS6000 - Manual (Page 515)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 513
53-1001931-01
DHCP Config commands
17
client-identifier
DHCP Config commands
Assigns a name to the client-identifier
A client identifier is used to reserve an IP address for a DHCP client.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
client-identifier <identifier>
Parameters
Example
RFController(config-dhcp)#client-identifier testid
RFController(config-dhcp)#
client-identifier
<identifier> Prepends a null character. Use \\0 at the beginning (a
single \ in the input is ignored)