Brocade Communications Systems RFS6000 - Manual (Page 798)

796 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
approved-aps Approved APs seen by access-point
scans
channel-power List of available channel and power
levels for a radio
client wireless client configuration
config Wireless Configuration Parameters
country-code-list List of supported country names and 2
letter IS0 3166 codes
default-ap Information for default access-point
hotspot-config Wlan hotspot configuration
ids Intrusion detection parameters
known Known AP related parameters
mac-auth-local list out the mac-auth-local entries
mesh Mesh related parameters
wireless-client Details of associated wireless-clients
multicast-packet-limit multicast-packet-limit
phrase-to-key display the WEP keys generated by a
passphrase
qos-mapping Quality of Service mappings used for
mapping wireless priorities and
802.1p / DSCP tags
radio Radio related commands
radio-group radio group configuration
regulatory Regulatory (allowed channel/power)
information for a particular country
self-heal-config Self-Healing Configuration Parameters
sensor Wireless Intrusion Protection System
parameters. Use "sensor vlan x" to
specify the vlan(s) to which the
sensors are connected.
smart-rf Smart-RF Management Commands
unapproved-aps Unapproved APs seen by access-point or
wireless-client scans
wireless-controller-statistics wireless-controller statistics
wlan Wireless LAN related parameters
RFController(config-wireless-smart-rf)#show wireless smart-rf ?
calibration-status display smart-rf calibration status
configuration display smart-rf configuration
history display smart-rf assignment history since
latest calibration
radio Radio related commands
RFController(config-wireless-smart-rf)#
RFController(config-wireless-smart-rf)#show wireless smart-rf configuration
Smart-RF Module : disabled
Smart-RF Calibration configuration:
auto-assign detector : enabled
auto-assign channel : disabled
auto-assign power : enabled
auto-assign rescuer : enabled
channels selected :
channels excluded :
assignable-power-range : [ 4 - 16 ] dBm
number of rescuers : 3
scan dwell time : 1 second