Brocade Communications Systems RFS6000 - Manual (Page 363)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 361
53-1001931-01
Chapter
9
Crypto-ipsec Instance
In this chapter
• Crypto IPSec config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
Use the
(config-crypto-ipsec)
instance to define the transform configuration for securing
data (esp-3des, esp-sha-hmac etc.).
To navigate to this instance, use the command
RFController(config)#crypto ipsec transform-set
<transform-set-name> <encryption-type> <auth-type>
RFController(config-crypto-ipsec)#
The transform set is assigned to a crypto map using the map’s transform-set command. For more
details, see
“set” on page 380.
Crypto IPSec config commands
The table below summarizes the
config-crypto-ipsec
commands:
TABLE 9 Crypto IPsec Command Summary
Command Description Ref.
show Displays running system information page 367
mode Configures the IP Sec transportation mode page 365
show Clears the display screen page 59
end Ends the current mode and moves to the EXEC mode page 362
exit Ends the current mode and moves to the previous mode page 363
help Describes the interactive help system page 364
no Negates a command or set its defaults page 366
service Invokes service commands to troubleshoot or debug
(config-crypto-isakmp)
instance configurations
page 369