Redundancy group – Brocade Communications Systems RFS6000 User Manual

Page 92

Advertising
background image

90

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide

53-1001931-01

show

2

redundancy group

Common to all modes

This command displays the controller’s IP address, number of active neighbors, group license,
installed license, cluster AP adoption count, controller adoption count, hold time, discovery time,
heartbeat interval, cluster id and controller mode.

In a cluster, this command displays the redundancy runtime and configuration of the
“self-controller”. Use

config

to view only configuration information and/or

runtime

parameters.

Supported in the following platforms:

Mobility RFS4000 Controller

Mobility RFS6000 Controller

Mobility RFS7000 Controller

Syntax

show redundancy group [config|runtime]

Parameters

Example

RFController(config)#show redundancy group

Redundancy Group Configuration Detail

Redundancy Feature : Disabled

Redundancy group ID : 1

Redundancy Mode : Primary

Redundancy Interface IP : 0.0.0.0

Number of configured peer(s) : 0

Heartbeat-period : 5 Seconds

Hold-period : 15 Seconds

Discovery-period : 30 Seconds

Handle STP : Disabled

Controller Installed License : 48

Controller running image version : 4.02.0

Auto-revert-period : 5 mins

Auto-revert Feature : Disabled

DHCP-Server Redundancy : Disabled

Redundancy Group Runtime Information

Redundancy Protocol Version : 2.0

Redundancy Group License : 0

Cluster AP Adoption Count :

Not Applicable

Controller AP Adoption Count : Not Applicable

Redundancy State : Disabled

Radio Portals adopted by Group : Not Applicable

Radio Portals adopted by this Controller : Not Applicable

Rogue APs detected in this Group : Not Applicable

Rogue APs detected by this Controller : Not Applicable

Clients associated in this Group : Not Applicable

Clients associated in this Controller : Not Applicable

redundancy group
[config | runtime]

Displays redundancy runtime and configuration details.

config – Displays configured redundancy group information

runtime – Displays runtime redundancy group information

Advertising
This manual is related to the following products: