Brocade Communications Systems RFS6000 - Manual (Page 451)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 449
53-1001931-01
Chapter
14
Extended ACL Instance
In this chapter
• Extended ACL config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449
• Configuring IP Extended ACL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
The Extended ACL instance
(config-ext-nacl)
is used to manage the extended Access Control
List entries associated with the controller.
To navigate to this instance, use the command
RFController(config)#ip access-list extended [<ACL-name>|
<100-199>|<2000-2699>]
RFController(config-ext-nacl)#
Extended ACL config commands
Table 14 summarizes
config-ext-nacl
commands:
TABLE 14 Extended ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 450
deny Specifies packets to reject page 451
exit Ends the current mode and moves to the previous mode page 456
help Displays the interactive help system page 457
mark Specifies packets to mark page 458
no Negates a command or sets its defaults page 462
permit Specifies packets to forward page 463
service Invokes the service commands to troubleshoot or debug
(config-if) instance configurations
page 467
show Displays running system information page 468