Brocade Communications Systems RFS6000 - Manual (Page 786)

784 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
Example
RFController(config-wireless-smart-rf)#radio 1 antenna-gain 20
RFController(config-wireless-smart-rf)#radio 1 coverage-area 18
RFController(config-wireless-smart-rf)#radio 1 lock-auto-assign channel
RFController(config-wireless-smart-rf)#radio 1 radio-mac 1-2-3-4-5-6
RFController(config-wireless-smart-rf)#radio 1 rescuer 1-2-3-4-5-6 20 30
RFController(config-wireless-smart-rf)#radio 1-2-3-4-5-6 antenna-gain 20
RFController(config-wireless-smart-rf)#radio 2-5,8,11,15 antenna-gain 20
RFController(config-wireless-smart-rf)#radio all-11a coverage-rate 5p5
RFController(config-wireless-smart-rf)#radio all-11b lock-auto-assign power
RFController(config-wireless-smart-rf)#radio all-llbg antenna-gain 20
RFController(config-wireless-smart-rf)#radio 1 width dual
RFController(config-wireless-smart-rf)#
all-11b [antenna-gain|
coverage-rate|
lock-auto-assign] Sets the radio parameters for all 802.11b radios.
•
antenna-gain <GAIN> – Sets the antenna-gain value to GAIN
for the selected radio.
•
coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] –
Sets the coverage rate threshold value for under-coverage
detection to the selected value from the list.
•
lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf assignments.
all-11bg [antenna-gain|
coverage-rate|
lock-auto-assign] Sets the radio parameters for all 802.11bg radios.
•
antenna-gain <GAIN> – Sets the antenna-gain value to GAIN
for the selected radio.
•
coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] –
Sets the coverage rate threshold value for under-coverage
detection to the selected value from the list.
•
lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf assignments.