Brocade Communications Systems RFS6000 - Manual (Page 616)

614 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
Parameters
Example
RFController(config-wireless-client-list)#station ExcludeList1
AA:BB:CC:DD:EE:FF
RFController(config-wireless-client-list)#
wlan
config-wireless-client-list commands
Adds a client exclude list name into/from the WLAN
Syntax
wlan [<index>|<index-list>]
Parameters
Example
RFController(config-wireless-client-list)#wlan 1
RFController(config-wireless-client-list)#
<host-name>
[<MAC>|<MAC/Mask>] Defines an index for this host entry in the client list. The host
station name <host-name> must be of size 1-21 characters.
•
<MAC> –Sets the Client mac address in AA-BB-CC-DD-EE-FF
or AA:BB:CC:DD:EE:FF or AABB.CCDD.EEFF format.
•
<MAC/Mask> – Sets the Client MAC address and mask in
AA-BB-CC-DD-EE-FF or AA:BB:CC:DD:EE:FF or
AABB.CCDD.EEFF format.
wlan [<index>|
<index-list>]
•
<index> – Sets a single WLAN index in the range 1-256
•
<index-list> – A list (1,3,7) or range (3-7) of WLAN indices