Brocade Communications Systems RFS6000 - Manual (Page 291)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 289
53-1001931-01
Global Configuration commands
5
•
associated – Wireless station associated
•
deniedAssociationAsPortCapacity
Reached – Wireless station denied association
due to port capacity reached
•
deniedAssociationOnCapability – Wireless station
denied association due to unsupported capability
•
deniedAssociationOnErr – Wireless station denied
association due to internal error
•
deniedAssociationOnInvalidWPAWPA2IE –
Wireless station denied association due to
invalid/absent WPA/WPA2 IE
•
deniedAssociationOnRates – Wireless station
denied association due to incompatible
Transmission rates
•
deniedAssociationOnSSID – Wireless station
denied association due to invalid SSID
•
deniedAssociationOnShortPream – Wireless
station denied association due to lack of short
preamble support
•
deniedAssociationOnSpectrum – Wireless station
denied association due to lack of spectrum
management capability
•
deniedAuthentication – Wireless station denied
802.11 authentication
•
disassociated – Wireless station disassociated
•
radiusAuthFailed – Wireless station failed radius
authentication
•
tkipCounterMeasures – TKIP counter measures
invoked
•
vlanChanged – Wireless station vlan id changed
•
wlan [vlanUserLimitReached|webPortalUnavailable|
webPortalUnconnected||webPortalUnreachable] –
Enables wireless wlan traps when:
•
vlanUserLimitReached – WLAN-VLAN user limit is
reached
•
webPortalUnavailable – Web portal unavailable
•
webPortalUnconnected – Web portal disconnected
•
webPortalUnreachable – Web portal unreachable
password 0 <password> SMTP Authentication Password.
•
0 – Password is specified unencrypted
•
<password> – Enter password up to 64 characters in length
port <1-65535> Enter SMTP Server TCP Port.
prefix <smtp-prefix> Enter SMTP subject prefix up to 16 characters in length.
recipient <1-4>
<recipient-address> Enter SMTP recipient index and SMTP recipient address up to 128
characters in length.
sender <sender-address> Enter SMTP sender address up to 128 characters in length.
smtp-server-address <IP> Host to receive SMTP notifications. Enter IP address/Hostname of
SNMP server up to 128 characters in length.
user <username> SMTP Authentication User. Enter username up to 64 characters in
length.