Brocade Communications Systems RFS6000 - Manual (Page 225)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 223
53-1001931-01
Global Configuration commands
5
Parameters
access-list
[<1-99>|<1300-1999>]
[permit|deny]
[<IP/MASK>|any|
host <IP>]
{[rule-precedence
<1-5000> {log}|log]} Adds a standard access list entry.
•
[<1-99>|<1300-1999>] – Defines access list number from
1-99 or 1300-1999
•
[deny|permit] – Defines action types on an ACL
•
[<IP/MASK>| host <IP>| any] – <IP/MASK> is the
source address of the network or host in dotted
decimal format For example, 101110/24 indicates
the first 24 bits of the source IP are used for
matching
•
The keyword any is an abbreviation for a source IP of
0.0.0.0 and source-mask bits equal to 0
•
The keyword host is an abbreviation for exact source
(A.B.C.D) and source-mask bits equal to 32
•
log – Generates log messages when the packet
coming from the interface matches the ACL entry. Log
messages are generated only for router ACL’s. This is
an optional parameter
•
rule-precedence <1-5000> – Define an Integer value
between 1-5000. This value sets the rule precedence
in the ACL. This is an optional parameter
access-list
[<1-99>|<1300-1999>]
mark [8021p
<0-7>|dscp <0-63>|tos
<0-255>]
[<IP/MASK>|any|host
<IP>] {[rule-precedence
<1-5000> {log}|log]} Adds a standard access list entry.
•
[<1-99>|<1300-1999>] – Defines access list number from
1-99 or 1300-1999
•
mark – Marks a packet. The action type mark is functional only
over a Port ACL
•
8021p <0-7> – Used only with the action type mark to
specify 8021p priority values
•
dscp <0-63> – Used only with the action type mark to
specify DSCP values
•
tos <0-255> – Used only with the action type mark to
specify type of service (tos) values
•
[<IP/MASK>| host <IP>| any] – <IP/MASK> is the
source address of the network or host in dotted
decimal format. For example, 10.1.1.10/24 indicates
the first 24 bits of the source IP are used for
matching
•
The keyword any is an abbreviation for a source IP of
0.0.0.0 and source-mask bits equal to 0
•
The keyword host is an abbreviation for exact source
(A.B.C.D) and source-mask bits equal to 32
•
log – Generates log messages when the packet
coming from the interface matches the ACL entry. Log
messages are generated only for router ACL’s. This is
an optional parameter
•
rule-precedence <1-5000> – Define an Integer value
between 1-5000. This value sets the rule precedence
in the ACL. This is an optional parameter