Brocade Communications Systems RFS6000 - Manual (Page 301)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 299
53-1001931-01
Global Configuration commands
5
Example
RFController(config)#snmp-server community TestCommunity ro
RFController(config)#
RFController(config)#snmp-server contact TestManager
RFController(config)#
RFController(config)#snmp-server enable traps all
RFController(config)#
RFController(config)#snmp-server enable traps miscellaneous lowFsSpace
RFController(config)#
RFController(config)#snmp-server enable traps redundancy memberUp
RFController(config)#
RFController(config)#snmp-server enable traps snmp linkup
RFController(config)#
RFController(config)#snmp-server enable traps wireless ap-detection
externalAPDetected
RFController(config)#
RFController(config)#snmp-server enable traps wireless ids excessiveProbes
RFController(config)#
RFController(config)#snmp-server enable traps wireless radio adopted
RFController(config)#
RFController(config)#snmp-server enable traps wireless self-healing activated
RFController(config)#
RFController(config)#snmp-server enable traps wireless station
tkipCounterMeasures
RFController(config)#
RFController(config)#snmp-server enable traps wireless-statistics min-packets
120
sysname The SNMP system name.
user [snmpmanager|
snmpoperator|snmptrap] Defines a user who can access the SNMP engine.
•
snmpmanager v3– Manager user
•
v3 [auth|encrypted] – User using v3 security
model
•
auth md5 <password> – Sets
authentication parameters for the user
•
md5 – Use HMAC MD5 algorithm for
authentication
•
<password> – The password for the user
•
encrypted [auth|des] – Displays privacy
parameters for the user
•
auth md5 <password>– Displays
authentication parameters for the user
•
des – Use CBC-DES for privacy
•
snmpoperator v3 – Operator user
•
snmptrap v3 – Trap user