Brocade Communications Systems RFS6000 - Manual (Page 159)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 157
53-1001931-01
User exec commands
3
clear
User exec commands
Resets the previous (last saved) command
Supported on the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
NOTE
Refer to the interface details below when using clear counter interface.
- ge <index> – Mobility RFS4000 Controller supports 4 GEs and Mobility RFS6000 Controller
supports 8 GEs
- me1 – Available in both Mobility RFS7000 Controller and Mobility RFS6000 Controller
- up1 – Available ib both Mobility RFS6000 Controller and Mobility RFS4000 Controller
- sa <1-4> – Available only in Mobility RFS7000 Controller
- sa <1-6> – Available only in Mobility RFS4000 Controller
Syntax
clear [crypto|mobility|spanning-tree]
clear crypto [ipsec|isakmp] sa {<IP>}
clear mobility [event-log|wireless-client|peer-statistics]
clear mobility event-log [wireless-client|peer]
clear mobility wireless-client [<MAC>|all|foreign-database|
home-database]
clear mobility peer-statistics {<Peer-IP>}
clear spanning-tree detected-protocols {interface <interface-name>}