Brocade Communications Systems RFS6000 - Manual (Page 259)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 257
53-1001931-01
Global Configuration commands
5
Usage Guidelines
1. Use the
no
command along with ip to undo any IP based configuration.
[no] ip(access-list|default-gateway|dos|dhcp|domain-lookup|
domain-name|http|local|name-server|nat|route|routing|ssh|telnet)
2. When using the
ip access-list
parameter, enter the following contexts:
• ext-nacl – Extended ACL. For more information, see
Chapter 14, Extended ACL Instance
• std-nacl – Standard ACL. For more information, see
Chapter 15, Standard ACL Instance
• dhcp – DHCP Server instance. For more information, see
Chapter 17, DHCP Server Instance
•
tcp -max-incomplete –Configures the maximum half-open
TCP connections in the system
•
high <1-1000> – Sets the upper threshold value
between 1 and 1000
•
low <1 - 1000> – Sets the lower threshold value
between 1 and1000
igmp snooping
{[querier|unknown-multicas
t-fwd|vlan]} Configures IGMP Snooping parameters.
•
unknown-multicast-fwd – Optional. Forwards packets from
unregistered multicast servers
•
querier
{[address|max-response-time|query-interval|timer|version]
}}– Configures IGMP querier. All options are optional
•
address <IP> – Sets GMP querier source IP address
•
max-response-time <1-25> – Sets IGMP querier
maximum response time in seconds
•
query-interval <1-18000> – Sets IGMP querier query
interval
•
timer expiry <60-300> – Sets querier other querier time
out in seconds to a value in the range 60 to 300
•
version <1-3> – Sets IGMP version
•
vlan [<1-4094>|<vlan-list>]
{mrouter|querier|unknown-multicast-fwd]}
– Identifies the
vlan to use. All options are optional
•
vlan <1-4094>|<vlan-list>] – Sets the vlan to use for
IGMP Snooping
•
<1-4094> – A single VLAN ID
•
<vlan-list> – A list of VLAN IDs
•
mrouter [interface <interface> |learn pim-dvmrp]
– Sets information for Multicast router
•
interface <interface> – Gigabit Ethernet interfaces
to be configured. <interface> can be a single
interface or a list of interfaces
•
learn pim-dvmrp – The multicast controller
learning protocol using PIM-DVMRP protocol
•
querier
{[address|max-response-time|query-interval|time
r|version]}} – Sets IGMP querier for the selected
VLAN interface
•
unknown-multicast-fwd – Forwards packets from
unregistered multicast servers for this VLAN