Brocade Communications Systems RFS6000 - Manual (Page 482)

480 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Standard ACL config commands
15
no
Standard ACL config commands
Negates a command or sets its defaults
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
no [deny|mark|permit]
Negates all the syntax combinations used in deny, mark and permit designations.
Parameters
Example
RFController(config-std-nacl)#no permit any rule-precedence 10
RFController(config-std-nacl)#
RFController(config-std-nacl)#no deny any rule-precedence 20
RFController(config-std-nacl)#
RFController(config-std-nacl)#no mark tos 4 192.168.2.0/24 rule-precedence 30
RFController(config-std-nacl)#
deny Specifies packets to reject
mark Specifies packets to mark
permit Specifies packets to forward