Brocade Communications Systems RFS6000 - Manual (Page 150)

148 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
RFController>
RFS7K-1(config)#show virtual-ip status
Virtual-IP State : Master
Virtual-IP Config Status : Enabled
Virtual-IP Runtime Status : Enabled
Cluster Redundancy Status : Enabled
Advertisement Length : 176
Total Advertisements Sent : 1619309
Total Learning Advts Sent : 0
Total Advertisements Recvd : 0
DHCP Server status : Active
Total Number of Peers : 1
Peer Status Information :
+----------------------------------------------------------------------+
| Peer IP | Status | Advts Sent | Advts Recvd |
+----------------------------------------------------------------------+
| 192.168.11.5 | Slave | 600214 | 0 |
+----------------------------------------------------------------------+
Virtual IP Master Details :
+--------------------------------------------------+
| Vlan | Priority | ControllerID | Virtual IP |
---------------------------------------------------+
|11 | 3232238340| 192.168.11.4| 192.168.11.10|
+--------------------------------------------------+
RFController>
RFS7K-1(config)#no virtual-ip all
all Remove all VIP entries
enable Disable IP Redundancy protocol
vlan VLAN of the Virtual IP
vmac Virtual MAC
NOTE
On executing the above command, all the virtual-ip entries configured on the Controller will be
removed.
RFS7K-1(config)#no virtual-ip enable
Disables the virtual-ip protocol
RFS7K-1(config)#no virtual-ip vlan 1
Removes the configured virtual-ip of that vlan
RFS7K-1(config)#no virtual-ip vmac
Removes the configured vmac on the controller