Brocade Communications Systems RFS6000 - Manual (Page 585)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 583
53-1001931-01
Radius configuration commands
19
server
Radius configuration commands
Configures server certificate parameters used by a RADIUS server
The server certificate is a part of a trustpoint created using crypto on page 233.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
server trust-point <trust-point name>
Parameters
Usage Guidelines
Create a trustpoint using
(crypto-pki-trustpoint )
. The server certificate must be created
under the trustpoint using crypto-pki commands. Refer to crypto on page 233 for more
information.
Example
RFController(config-radsrv)#server trust-point TestTP
RFController(config-radsrv)#
server trust-point
<trust-point name> Configures server certificate parameters
•
trust-point <trust-point name> – Sets the trustpoint
configuration
•
<trust-point name> – Existing trustpoint name