Brocade Communications Systems RFS6000 - Manual (Page 658)

656 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
secure-wispe-default-secret
Wireless configuration commands
Configures the default shared secret for secure WISPE
If a new shared secret is not configured for an AP or a list of APs, then a default shared secret will
be assigned. The value of default shared secret is the string "default".
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
secure-wispe-default-secret [<secret-key>|0 <secret-key>|
2 <secret-key>]
Parameters
Example
RFController(config-wireless)#secure-wispe-default-secret
0x1d8e4fc780be92537109
RFController(config-wireless)#
[<secret-key>|
0 <secret-key>|
2 <secret-key>] Enter a secret key. The string length must not exceed 64
characters.
•
0 <secret-key> – Password is specified unencrypted.
•
2 <secret-key>– Password is specified encrypted with
password-encryption secret.
•
<secret-key> – 8 to 64 characters.