Brocade Communications Systems RFS6000 - Manual (Page 247)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 245
53-1001931-01
Global Configuration commands
5
do
Global Configuration commands
Runs commands from either the User Exec or Priv Exec mode
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
do <privilege mode commands>
Parameters
None
Example
RFController(config)#do ping 157.235.208.69
PING 157.235.208.69 (157.235.208.69): 100 data bytes
128 bytes from 157.235.208.69: icmp_seq=0 ttl=64 time=0.1 ms
128 bytes from 157.235.208.69: icmp_seq=1 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=2 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=3 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=4 ttl=64 time=0.0 ms
--- 157.235.208.69 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.1 ms
RFController(config)#
NOTE
In the example above,
ping
is a PRIV EXEC command.