Permitting telnet based traffic, Permitting icmp based traffic – Brocade Communications Systems RFS6000 User Manual

Page 468

Advertising
background image

466

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide

53-1001931-01

Extended ACL config commands

14

RFController(config-ext-nacl)#permit ip 192.168.1.10/24 192.168.2.0/24

rule-precedence 40

RFController(config-ext-nacl)#

Permitting Telnet based traffic

The example below permits Telnet traffic from the source subnet and the destination subnet and
denies all other traffic over an interface:

RFController(config-ext-nacl)#permit tcp 192.168.4.0/24 192.168.5.0/24 eq 23

rule-precedence 10

RFController(config-ext-nacl)#

Permitting ICMP based traffic

The example below permits ICMP traffic and denies all other traffic over an interface:

RFController(config-ext-nacl)#permit icmp any any rule-precedence 30

RFController(config-ext-nacl)#)#

Advertising
This manual is related to the following products: