IDEC MicroSmart - Manual (Page 119)

4: O PERATION B ASICS
« FC4A M ICRO S MART U SER ’ S M ANUAL » 4-7
6. Enter I1 in the Allocation Number field, and click OK.
A NC contact of input I1 is programmed in the second column of the first ladder line.
At the end of the first ladder line, program the OUT instruction by inserting a NO coil of output Q0.
7. Click the Output coil icon .
8. Move the mouse pointer to the third column of the first ladder line where you want to insert an output coil, and click
the left mouse button.
Note: Another method to inser t an instruction (either basic or advanced) is to type the instruction symbol, OUT, where
you want to inser t the instruction.
The Output dialog box appears.
9. Enter Q0 in the Allocation Number field, and click OK.
A NO output coil of output Q0 is programmed in the right-most column of the first ladder line. This completes program-
ming for rung 1.
Continue programming for rungs 2 and 3 by repeating similar procedures.
A new rung is inserted by pressing the Enter key while the cursor is on the preceding rung. A new rung can also be
inserted by selecting Edit > Append > Rung. When completed, the ladder program looks like below.
Now, save the file with a new name.
10. From the menu bar, select File > Save As and type TEST01.LDR in the File Name field. Change the Folder or Drive
as necessary.
Click OK, and the file is saved in the selected folder and drive.
To inser t a new ladder line without
creating a new rung, press the down
arrow key when the cursor is on the
last line or press the right arrow key
when the cursor is at the right-most
column of the last line.