IDEC MicroSmart User Manual
Page 180
6: A
LLOCATION
N
UMBERS
6-16
« FC4A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
»
Special Data Registers for Port 2
Note: D8100 through D8199 are not available on the all-in-one 10-I/O type CPU module; all other CPU modules have D8100
through D8199.
D8000 System Setup ID (Quantity of Inputs)
The total of input points provided on the CPU module and connected expansion input modules is stored to D8000. When a
mixed I/O module (4 inputs and 4 outputs) is connected, 8 input points are added to the total.
D8001 System Setup ID (Quantity of Outputs)
The total of output points provided on the CPU module and connected expansion output modules is stored to D8001.
When a mixed I/O module (4 inputs and 4 outputs) is connected, 8 output points are added to the total.
Allocation
Number
Description
Updated
See Page
D8085
Slave Station 17
Communication Error (at Master Station)
When error occurred
D8086
Slave Station 18
Communication Error (at Master Station)
When error occurred
D8087
Slave Station 19
Communication Error (at Master Station)
When error occurred
D8088
Slave Station 20
Communication Error (at Master Station)
When error occurred
D8089
Slave Station 21
Communication Error (at Master Station)
When error occurred
D8090
Slave Station 22
Communication Error (at Master Station)
When error occurred
D8091
Slave Station 23
Communication Error (at Master Station)
When error occurred
D8092
Slave Station 24
Communication Error (at Master Station)
When error occurred
D8093
Slave Station 25
Communication Error (at Master Station)
When error occurred
D8094
Slave Station 26
Communication Error (at Master Station)
When error occurred
D8095
Slave Station 27
Communication Error (at Master Station)
When error occurred
D8096
Slave Station 28
Communication Error (at Master Station)
When error occurred
D8097
Slave Station 29
Communication Error (at Master Station)
When error occurred
D8098
Slave Station 30
Communication Error (at Master Station)
When error occurred
D8099
Slave Station 31
Communication Error (at Master Station)
When error occurred
D8100-D8102
— Reser ved —
—
—
D8103
On-line Mode Protocol Selection
When sending/receiving data
D8104
RS232C Control Signal Status
Ever y scan
D8105
RS232C DSR Input Control Signal Option
When sending/receiving data
D8106
RS232C DTR Output Control Signal Option
When sending/receiving data
D8107-D8108
— Reser ved —
—
—
D8109
Retr y Cycles
At retr y
D8110
Retr y Inter val
Ever y scan during retr y
D8111
Modem Mode Status
At status transition
D8112-D8114
— Reser ved —
—
—
D8115-D8129
AT Command Result Code
When returning result code
D8130-D8144
AT Command String
When sending AT command
D8145-D8169
Initialization String
When sending init. string
D8170-D8199
Telephone Number
When dialing