IDEC MicroSmart - Manual (Page 21)

« FC4A M ICRO S MART U SER ’ S M ANUAL » 2-1
2: M
ODULE
S
PECIFICATIONS
Introduction
This chapter describes MicroSmart modules, parts names, and specifications of each module.
Available modules include all-in-one type and slim type CPU modules, digital input modules, digital output modules,
mixed I/O modules, analog I/O modules, HMI module, HMI base module, communication adapters, communication mod-
ules, memory cartridge, and clock cartridge.
CPU Modules (All-in-One Type)
All-in-one type CPU modules are available in 10-, 16-, and 24-I/O types. The 10-I/O type has 6 input and 4 output termi-
nals, the 16-I/O type 9 input and 7 output terminals, and the 24-I/O type 14 input and 10 output terminals. Every all-in-one
type CPU module has communication port 1 for RS232C communication. In addition, the 16- and 24-I/O type CPU mod-
ules have port 2 connector to install an optional RS232C or RS485 communication adapter for 1:N computer link, modem
communication, or data link communication. Every all-in-one type CPU module has a cartridge connector to install an
optional memory cartridge or clock cartridge.
CPU Module Type Numbers (All-in-One Type)
Parts Description (All-in-One Type)
Power Voltage 10-I/O Type 16-I/O Type 24-I/O Type
100 -240V AC (50/60 Hz) FC4A-C10R2 FC4A-C16R2 FC4A-C24R2
24V DC FC4A-C10R2C FC4A-C16R2C FC4A-C24R2C
(3) Input Terminals
(5) Expansion Connector
(6) Input LED (IN)
From Left:
(7) Power LED (PWR)
(8) Run LED (RUN)
(9) Error LED (ERR)
(10) Status LED (STAT)
(11) Output LED (OUT)
(2) Sensor Power Terminals
(12) Por t 1
(13) Analog Potentiometer
(14) Por t 2 Connector
Bottom View
(15) Car tridge Connector
(1) Power Supply Terminals
(4) Output Terminals
(17) Hinged Lid
(16) Terminal Cover
(20) Expansion
Connector
Seal
(16) Terminal Cover
These figures illustrate the 24-I/O
type CPU module.
Functions of each par t are described
on the following page.
(19) Dummy Car tridge
(18) HMI Connector Cover