INFICON STC-2000A Thin Film Deposition Controller Operating Manual - Manual (Page 124)

p
STC-2000A DEPOSITION CONTROLLER
y
The following screens are examples of what may appear after a PURGE/REBOOT sequence:
The letter designators are:
P Film Parameters
I I/O Programs
A Process Accounting
S Process Sequences
Press the area indicated to acknowledge memory loss in the memory sectors represented by the designators.
The memory loss message is meant to alert the user that a change in memory contents has occurred in the
areas represented by the letter designators and that parameter/program dependent processes need to be
evaluated and the unit reprogrammed accordingly.
SECTION 3.XX page 124 of 292