INFICON STC-2000A Thin Film Deposition Controller Operating Manual - Manual (Page 141)

p
STC-2000A DEPOSITION CONTROLLER
y
SECTION 3.XX page 141 of 292
To select/use Sample and Hold (see System Configuration parameter)...
Screen Key[s] to press
RunTime [area below L/Q]
RunTime SMPL
RunTime HOLD
To view OPT/INF (options / info)...
Screen Key[s] to press
RunTime fixed MENU
MAIN MENU EXECUTIVE MENU
EXECUTIVE MENU OPT/INF
OPT/INF MORE (more pages)
To select ACTIVE FILM (non-sequencing mode only)...
Screen Key[s] to press
RunTime fixed MENU
MAIN MENU NEXT ACTIVE FILM
Numeric entry Digit[s] + ENTER
In SEQUENCING mode, the active film is set by the active process.