INFICON STC-2000A Thin Film Deposition Controller Operating Manual - Manual (Page 94)

p
STC-2000A DEPOSITION CONTROLLER
y
When the destination is greater than 2, the line list will appear with the destination as the third line of the
four displayed lines with the edit cursor on this line. This gives a two previous and one succeeding line
perspective for reference and relational purposes. Near the end of the list this display preference is not in
effect.
Pressing the EDT (edit) key generates the following screen. If a password has been used (a non-zero
value), an intermediate password entry screen will appear. See the end of this section for more details.
Navigation remains as previously described. Three new edit related choices are now possible: change line
(CHG), insert line (INS), and delete line (DEL). DEL deletes the line with cursor. INS inserts a new line
after the line with the cursor. The following screens will help describe the change (CHG) line (that is, the
edited line elements). BAK (back) always returns to the previous screen, discarding entries, if any were
made.
Pressing the CHG (change) key produces the next screen. Take note of the current values on the edited line
(line with the cursor ">"). This screen is the starting point for modification of mode, film# and thickness.
When a line element is edited(changed), an edit line appears at the bottom of the screen and shows the
value in the temporary workspace.
Process Edit
menu
Process
Edit/Change
menu
SECTION 3.XX page 94 of 292