INFICON STC-2000A Thin Film Deposition Controller Operating Manual - Manual (Page 56)

p
STC-2000A DEPOSITION CONTROLLER
y
The following 3 LCD screen depictions show the second, third and fourth parts of the above 4 part
sequence. The following 3 screens will be called the 1
st STATUS screen, the 2 nd STATUS screen and
the 3 rd STATUS screen respectively.
1 st STATUS
screen
2 nd STATUS
screen
Variation of 2
nd
STATUS screen showing MAX power limit indication
2
nd
STATUS
screen
2 nd press of STATUS key from Runtime screen brings forth this screen.
3 rd STATUS
screen
3
rd
press of STATUS key from Runtime screen brings forth this screen.
The following shows a RunTime screen that was put into manual mode by pressing the fixed front panel
MANUAL key while running a deposition cycle. The text MANUAL appears on the screen in place of the
text messages: rise 1, soak 1, rise 2, soak 2, deposit, etc.
SECTION 3.XX page 56 of 292