INFICON STC-2000A Thin Film Deposition Controller Operating Manual - Manual (Page 260)

p
STC-2000A DEPOSITION CONTROLLER
y
______________________________________________________________________
Purge all I.O Programs
Purge all I.O Programs Group 15 –
Command h
This command clears the entire I/O program of the current bank to empty.
Purge all of I/O Program (h)
The ‘h’ command clears the entire I/O program of it’s current bank to empty. Requires =200 to
work as a safety.
______________________________________________________________________
Command: h
Mnemonic: EXCT_iopurg
Parameters:
=200 as a safety.
Description: Clears entire I/O program of current bank to empty.
Returns:
[RZCD_AOK] if proper parameter value was sent.
[RZCD_ILDV] if improper value for parameter arguments.
[RZCD_ILSN] if too many arguments, wrong delimiters, etc..
External Memory Module Status Group 16 –
Command I
External Memory Module Status
This command queries the STC-2000A for current status of the optional external memory module <not
implemented>.
External Memory Module Status (i)
The ‘I’ command queries the STC-2000A for current status of the External Memory Module.
Returns 0,1, or 2 indicating: (0) not installed, (1) installed, or (2) bogus, meaning system hung waiting for
clear key to be pressed.
Command: i
Mnemonic: EXCT_mrxstat
Parameters: none.
Description:
Queries STC-2000A for current status of Memory Module.
Returns: Numeric value 0, 1 , 2 for not installed, installed, bogus. Bogus means system is menu
hung until a clear key is pressed.
[RZCD_AOK] if proper parameter value was sent.
[RZCD_ILDV] if improper value for parameter arguments.
[RZCD_ILSN] if too many arguments, wrong delimiters, etc.
SECTION 6.XX page 260 of 292