INFICON STC-2000A Thin Film Deposition Controller Operating Manual - Manual (Page 93)

p
STC-2000A DEPOSITION CONTROLLER
y
Press the UP
↑ key one more time for the following.
GO2 STP: pressing the GO2 STP (GOTO STEP) key takes you to the step/line whose number you enter
and accept by pressing ENT on the number entry key menu. The following screen is the result of pressing
the GO2STP key. If a number is entered that is greater than the last (END) line, the cursor would move to
the last (END) line.
The following screen shows the result of pressing the "1" key followed by pressing the "5" key. This value
can be accepted by pressing the ENT key, abandoned by pressing the BAK key or continued by pressing
more number keys (shifting more digits into the two digit GOTO prompt area at the end of the last line).
the following screen shows the result of pressing GO2STP and entering 15 as the destination (the "1" key,
the "5" key and the ENT key)...
SECTION 3.XX page 93 of 292