Stc-2000a deposition controller – INFICON STC-2000A Thin Film Deposition Controller Operating Manual User Manual
Page 33
Advertising
p
STC-2000A DEPOSITION CONTROLLER
y
Following is a diagram of a typical evaporator installation. This diagram is repeated and described further
in Section 3 (see fig. 3.7).
NOTE: Chart recorder function through memory module connection uses optional hardware and TBD software.
CRYSTAL SENSOR
SHUTTER
DATA AQUISITION
COMPUTER
CHAMBER
DEPOSITION
SOURCE
OSCILLATOR
Memory Module
CHART RECORDER
WARNING
!
I/O 4 I/O 3 I/O 2 I/O 1
SENSOR
SOURCE
INPUTS / OUTPUTS
1
2
1
2
FUSE: 2 X 2.00 AMP
QUICK-ACTING (F) 250V
90-264 VAC, 50-60 Hz, 230 VA MAX
THE POWER CORD PROTECTIVE
GROUNDING CONDUCTOR MUST
BE CONNECTED TO GROUND, NO
USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL
instruments
R
S
2
3
2
M
E
M
SECTION 2.XX
page 33 of 292
Advertising