INFICON STC-2000A Thin Film Deposition Controller Operating Manual - Manual (Page 68)

p
STC-2000A DEPOSITION CONTROLLER
y
Figure- 3.7: Executive Menu.
fixed STATUS Key
Fixed STATUS key removes Main Menu (or any other menu screen) and returns the RunTime Screen. The
first press of the STATUS key after the Runtime screen is displayed shows a version of the Runtime screen
with vital parameters in large text characters in place of the graph and date/time, run #, etc. A second and
third press of the STATUS key after the Runtime screen appears will invoke detailed power and crystal
information by channel. [See STATUS key illustrations in section 3.0]
Service Menu
SERVICE menu – This choice brings up the Service MENU which provides selection of : SEQ vs. non-
SEQ product function, return to factory settings, purge ALL stored data, and test mode entry.
Keys toggle functions and key labels alternate between TEST on / TEST off, SEQ / non-SEQ,
etc. To initiate any of the Service MENU personalities, any or all four of the choices are toggled
on or off or sequenced as needed and the Accept/Restart Product key is pressed. The product
will restart with the selected personalities in effect. Only the user selected SEQ/non-SEQ
personality will remain in effect upon subsequent product power cycles. AS IS, PURGED and
FACTORY is a three way select. Optional memory interface card [see back panel], when installed,
adds Memory Card key functions to the factory/purge sequence and allows saving or restoring all
parameters, films, processes, and I/O programs in memory locations A and B to the memory card.
ARM RESET allows restarting with same features selected.
SECTION 3.XX page 68 of 292