Pw (password), Configuration – Yaskawa SMC–4000 User Manual
Page 188
178
SMC–4000 User Manual
PW (Password)
[Configuration]
DESCRIPTION: PW
The (PW) Password command sets or changes the controller's security password. The command requires
two parameters; p,p. Both parameters are the new password up to 8 characters in length. Both parameters
must be identical for the new password to be accepted. The password can only be set or changed while the
controller is in the "Unlocked" mode, (see the LC command) or a command error will result. Once a valid
password is entered, it is automatically burned into the controller EEPROM. The burn causes all parameters
listed on the BN page to be discarded.
ARGUMENTS: PW p,pwhere
p,p are identical passwords up to 8 characters in length.
All characters can be alphabetic or numeric.
USAGE:
RELATED COMMANDS:
EXAMPLES:
While Moving
Yes
Default Value
---
In a Program
No
Default Format
---
Command Line
Yes
Used as an Operand
No
Can be Interrogated
No
PW MOTION,MOTION
Set a new password "MOTION"
LC MOTION,1
Lock Controller
LC MOTION,0
Unlock Controller