Rs (reset) – Yaskawa SMC–4000 User Manual
Page 209
Advertising
199
SMC–4000 User Manual
RS (Reset)
[General]
DESCRIPTION:
The RS command resets the processor to its power-on condition. The previously saved (burned) state of the
controller, along with parameter values, and saved sequences are restored.
ARGUMENTS: None
USAGE:
EXAMPLES:
While Moving
Yes
Default Value
0
In a Program
No
Default Format
---
Command Line
Yes
Can be Interrogated
No
Used as an Operand
No
RS
Reset the controller
Advertising