Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 112
Advertising
Chapter 5: Stacking Commands
112
Section I: Basic Operations
Priority - The priority number of a switch. The range is 1 to 16. The
lower the number, the higher the priority. To set this value, refer to
“SET STACK” on page 108. This value only applies when the ID
numbers are set automatically.
Mac Address - The MAC address of a switch.
Example
show stack
AlliedWare Plus
Command
Syntax
show stack
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus# show stack
Advertising