Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 593
AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs
593
delete vlan=Service ports=2 frame=tagged
delete vlan=Service ports=6-8 frame=untagged
Using Syntax 2, you can do the whole thing with just one command:
delete vlan=Service untaggedports=6-8 taggedports=2
AlliedWare Plus
Command
Syntax
To remove untagged ports:
no switchport access vlan
To remove tagged ports:
switchport trunk allow vlan remove
vid
Mode
Port Interface mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This example removes untagged port 5 from its VLAN and returns it to the
Default VLAN:
awplus> enable
awplus# configure terminal
awplus(config)# interface 5
awplus(config-if)# no switchport access vlan
This example removes tagged ports 18 and 19 from a VLAN with the VID
7:
awplus> enable
awplus# configure terminal
awplus(config)# interface 18,19
awplus(config-if)# switchport trunk allow vlan remove 7