Allied Telesis AT-S63 - Manual (Page 541)

AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols 541
Description
These AlliedWare Plus commands are identical to the standard command.
Examples
The following commands set the hello time to 7 seconds and the
forwarding delay to 25 seconds:
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree hello-time 7
awplus(config)# spanning-tree forward-time 25
The FORCEVERSION parameter sets the RSTP mode. Settings 1 and 2
are STP compatible and force STP compatible, respectively. These
settings are identical. Setting 3 is normal RSTP. These commands set the
switch to STP compatible:
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree forceversion 1