Allied Telesis AT-S63 - Manual (Page 185)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 185
The following command adds the multicast MAC address 01:00:51:00:00
10 to ports 1 to 5 in the Engineering VLAN:
add switch fdb macaddress=01:00:51:00:00:10 port=1-5
vlan=Engineering
AlliedWare Plus
Command
Syntax
mac address-table static macaddress port vlan - name | vid
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This command adds the static MAC address 4B:C3:22:17:62:A4 to port 4
in the Production VLAN:
awplus> enable
awplus# configure terminal
awplus(config)# mac address-table static 4b:c3:22:17:62:a4 4
Production