Allied Telesis AT-S63 - Manual (Page 77)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 77
AlliedWare Plus
Command
Syntax
baud-rate 1200|2400|4800|9600|19200|38400|57600|115200
Mode
Line Console mode
Description
You can use this command to set the speed of the terminal port, but not
the command line prompt.
Example
This example sets the baud rate on the terminal port on the switch to
57600 bps:
awplus> enable
awplus# configure terminal
awplus(config-conf)# line console 0
awplus(config-line)# baud-rate 57600