Allied Telesis AT-S63 - Manual (Page 717)

AT-S63 Management Software Command Line User’s Guide
Section VIII: Port Security 717
To set a port to discard invalid packets, to send SNMP traps, and to
disable the port:
switchport port-security violation shutdown
Mode
Port Interface mode
Description
These AlliedWare Plus commands are identical to the standard command.
Example
This example sets the intrusion action on ports 22 to 24 discard the invalid
packets and send SNMP traps:
awplus> enable
awplus# configure terminal
awplus(config)# interface 22-24
awplus(config-if)# switchport port-security violation
restrict