Destroy mgmtacl – Allied Telesis AT-S63 User Manual
Page 819
AT-S63 Management Software Command Line User’s Guide
Section IX: Management Security
819
DESTROY MGMTACL
Syntax
destroy mgmtacl id=
value
Parameters
id
Specifies the identification number of the ACE you want
to delete. You can delete only one entry at a time.
Description
This command is used to delete ACEs from the Management ACL. You
specify the ACEs by their identification numbers, displayed with “SHOW
MGMTACL” on page 824.
Note
If you are remotely managing the switch from a Telnet management
session and the Management ACL is active, your management
session will end and you will be unable to reestablish it should you
delete the ACE that specifies your management workstation.
Example
The following command deletes the ACE with the identification number 18
from the Management ACL:
destroy mgmtacl id=18