Allied Telesis AT-S63 - Manual (Page 375)

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 375
DESTROY QOS TRAFFICCLASS
Syntax
destroy qos trafficclass= value
Parameter
trafficclass Specifies the ID number of the traffic class you want to
delete. You can delete more than one traffic class at a time.
You can specify the flow groups individually, as a range, or
both.
Description
This command deletes traffic classes.
Note
A traffic class must be removed from all of its policy assignments
before you can delete it.
Examples
This command deletes traffic class 22:
destroy qos trafficclass=22
This command deletes traffic classes 16 to 20 and 23:
destroy qos trafficclass=16-20,23
AlliedWare Plus
Command
Syntax
no policy-map id_number
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Command
Available
AlliedWare Plus