Allied Telesis AT-S63 - Manual (Page 310)

Chapter 17: Classifier Commands
310 Section II: Advanced Operations
CREATE CLASSIFIER
Syntax
create classifier= idnumber [description=” string ”]
[macdaddr= macaddress |any] [macsaddr= macaddress |any]
[ethformat=ethii-untagged|ethii-tagged|802.2-
untagged|802.2-tagged|any]
[priority=
integer |any] [vlan= name |1..4094|any]
[protocol=ip|arp|rarp| number |any] [iptos= integer |any]
[ipdscp= integer ] [ipprotocol= protocol | number |any]
[ipdaddr= ipaddress / mask |any]
[ipsaddr= ipaddress / mask |any] [tcpsport= integer |any]
[tcpdport= integer |any] [udpsport= integer |any]
[udpdport= integer |any]
[tcpflags=[urg|ack|psh|rst|syn|fin|any]
Parameters
classifier Specifies the ID number of the classifier. The number can
be from 1 to 9999. Each classifier must have a unique ID
number.
description Specifies a description of up to fifteen alphanumeric
characters for the classifier. Spaces are allowed, but a
description with spaces must be enclosed in double quotes.
macdaddr Defines a traffic flow by a destination MAC address. The
address can be entered in either of the following formats:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx
macsaddr Defines a traffic flow by a source MAC address. The
address can be entered in either of the following formats:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx
ethformat Defines a traffic flow by the type of Ethernet frame. The
options are:
ethII-untagged
ethII-tagged
802.2-untagged
802.2-tagged
priority Defines a traffic flow by the user priority level in a tagged
Ethernet frame. The value can be 0 to 7.
Command
Available
AlliedWare Plus